May 2019

56 AFTERMARKET MAY 2019 ADDITIVES AND CLEANERS www.aftermarketonline.net offering a ’shot’ solution which provides support for different areas of the cars emissions system. “For consumers looking to save fuel, increase MPG, combat DPF blockages and clean their vehicle emissions system, the 6-in-1 DPF Solution cleans carbon from the Injectors, EGR Valve, Turbo, Fuel Vaporiser, Sensors and assists the DPF with regeneration. This is especially good for consumers who drive Diesel vehicles for short distances where the DPF will not reach the required temperature or time to burn off the soot. The 6-in-1 Petrol Solution is future-proofed to assist the regeneration of the GPF Gasoline Particulate Filter, required by EU regulation for all vehicles from September last year, while also supporting the EGR Valve, fuel injectors, inlet/exhaust valve, turbo, glow plugs and reducing smoking. The product also helps consumers with classic cars who could suffer from corrosion should the E10 ‘green- petrol’ biofuel be introduced in the next few years, as well as unleaded fuel which already contains up to 5% ethanol.” Ben continues: “Scientifically developed by leading experts in Emissions Systems and rigorously tested, these products are a useful upselling opportunity for customers reporting DPF and other related issues. The 6-in-1 DPF Solution is not just useful for customers reporting one-off blocked DPFs, but from end consumers looking for a repeat solution to preventing DPF issues before they start happening. Our 6-in- 1 Petrol Solution is focused for customers reporting performance issues and wishing to protect against future corrosion.” Ben adds: “By focusing on multi- purpose shot solutions, garages have the opportunity to drive one-off upselling purchases from consumers, as well as providing a regular source of income from those who are looking for an alternative to using premium fuels.” Left: Throttle Valve Cleaner LIQUI MOLY: Cera Tec LIQUI MOLY Cera Tec reduces fuel consumption and makes the engine run smoother. There are oil additives based on a chemical wear protection and oil additives based on physical wear protection. LIQUI MOLY Cera Tec combines both approaches. The minute ceramic particles are a highly effective solid lubricant, tiny enough to easily pass the oil filter and strong enough to protect it effectively. They are more resistant to pressure and high temperatures than PTFE. Cera Tec should be added immediately following an oil change and is effective for 30,000 miles. www.liqui-moly.com EEC: 6 in 1 Petrol Solution EEC has launched its 6 in 1 petrol solution to complement its 6 in 1 DPF (Diesel) solution. The 6 in 1 petrol solution has been designed to keep fuel injectors, inlet/exhaust valves, turbos, EGR valves and glow plugs carbon-free, as well as to reduce smoking. Each bottle can be used for over 400 litres of fuel, with each 25ml ’shot’ increasing power and acceleration, cleaning the engine system, lowering emissions and combating the corrosion effect from ethanol (E10) fuels. The product will also help motorists with older and classic cars who could suffer from the corrosion issues should E10 green-petrol biofuel be introduced in the next few years, as well as unleaded fuel which already contains up to 5% ethanol. www.eurocats.co.uk