July/ August 2020

www.hpmag.co.uk HYDRAULICS & PNEUMATICS April/May 2018 37 An emphasis on quality, safety and performance make CEJN the ideal choice for safety hose reels. Premium materials have been selected to withstand outdoor use, UV radiation, chemicals and resistance to wear. With CEJN ’s additional products: hoses, couplings and blowguns, it is the most optimised system on the market. For more information contact Tom Parker Ltd. Maximise output Compressed air, water, electric & hi-viz options available Hose guide Lowest pressure drop on the market New hose stopper Quicker hose change Simple hose replacement Slow retract n n n FEATURES n n Compressed air Hi-Visibility hose with high 昀ow and low pressure drop safety hose reels from CEJN Sales: 01772 255109 | Online: tom-parker.co.uk Request a catalogue: marketing@tom-parker.co.uk n n Elesa has launched its new MM range of pneumatic clamps (up to 475Nm), which is claimed to offer fast, repetitive clamping cycles on manual or automated production lines to aid achievement of lower costs and more efficient output. The MM range is available in side locking, axial locking and axial centre locking (twin jaw) designs to suit the many variations required for handling of jigs and components in all orientations. They are produced in robust black oxide finished steel housings readily fitted to production machines of all types using an extensive selection of accessories. These provide many clamping adaptations quickly and easily with stock components to aid correct set up and to minimise down time. Accessories Accessories include ‘I’ brackets which enable mounting of jaw blocks and ‘Y’ brackets to accept clamping screws, so that correct installation may be executed in a simple fashion; also right angled brackets, jaw blocks, shim kits, centre bushings, mounting brackets and rear protective shields. Correct positioning at speed may be controlled with Elesa MM proximity switches connected to the clamping controller. MM series pneumatic fastening clamps are characterised by a ‘double effect’ pneumatic cylinder, which transmits a rotating movement to the clamping arm and achieves a maximum locking momentum when the clamping arm arrives at the stroke end. Under test these pneumatic fastening clamps have shown consistent performance for more than 20 million cycles. Further options include Teflon coating for high temperature and corrosion applications, FKM sealing gasket resistant to max working temperatures up to 270degC, plus fastening clamps with arm rotating movement and locking in the 20 degree position or in the 45 degree position. www.elesa.com New Elesa pneumatic fastening clamps speed manufacturing processes

RkJQdWJsaXNoZXIy MjQ0NzM=