Hydraulics & Pneumatics July/August 2022

Detail makes the difference with process automation sensors www.hpmag.co.uk HYDRAULICS & PNEUMATICS July/August 2022 121 Automation sensors and other specialist instrumentation used in the food and beverage industries are often required to deliver the tricky balance between reliability, product safety and affordability. The latest process automation sensors available from Baumer can help engineers working in these industries strike the right balance, but what about the often-overlooked consideration of long-term reliability and accuracy, especially over varying temperature conditions? For example, does your pressure transmitter consistently provide the desired accuracy at 50degC? Also considering that long-term drift will add further inaccuracies what about sensor performance about 60 months from commissioning? Maybe it’s time to check the spec. Put to the test Baumer’s range of PFMH hygienic pressure transmitters are a good example of sensors that have been put to the test as a way of illustrating their reliability of performing satisfactorily over the long term. They were pitted against some other manufacturers’ equivalent products to compare the full-scale accuracy (non- linearity, hysteresis, non-repeatability, zero-point and span) figures. The results indicated that the Baumer sensor retained its accuracy much better across the whole temperature range whereas others were almost +/- 3% accurate at only 50degC. This could have a huge impact when using pressure temperatures for hydrostatic level applications on outdoor tank installations with the likelihood of varying ambient temperatures. This could also have a detrimental effect on the efficiency of the system or machine, resulting in higher running costs and shorter lifespan of components. It could also have a consequential effect on product consistency, especially for food and beverage applications. 3-A sanitary standards (FDA-compliant) and EHEDG requirements Baumer’s PFMH fully welded pressure sensors with hygienic connection, touch-screen control and flush membrane are designed to meet 3-A sanitary standards (FDA-compliant) and EHEDG requirements. Suitable for pressure and continuous level measurement applications, they are resistant to all CIP (Clean-In-Place) cleaning media and are SIP (Steam-In-Place) capable to 150degC Max, >60 min, with versions also available for high media temperatures up to 200degC. www.baumer.com/gb/en